Milk Pasteurization Unit — UOM-1.0 to UOM-3.0 Infrared Design (Livestock of Ukraine No. 9, 1997)
Milk Pasteurization Unit (UOM-1.0 – UOM-3.0 Infrared Series)
By B. Simonov, V. Pietukhov, Ye. Simonov (Research Fellows, Institute of Animal Science of the Ukrainian Academy of Agrarian Sciences) and Yu. Kassich, A. Zavhorodnii (Research Fellows, Institute of Experimental and Clinical Veterinary Medicine of the Ukrainian Academy of Agrarian Sciences).
1. Epizootic Necessity & Development of the UOM-1.0 – UOM-3.0 Series
In the event of an epizootic outbreak, milk on dairy farms must be decontaminated. Even on disease-free farms, milk pasteurization is essential when selling milk directly to consumers or manufacturing dairy products. At the time of publication, the domestic industry of Ukraine did not manufacture dedicated equipment for this purpose. Meanwhile, commercial dairy farms of collective, state, cooperative, and private agricultural enterprises urgently needed simple, reliable pasteurization units with low energy consumption and low metal mass capable of reliably decontaminating (pasteurizing) milk while preserving its native nutritional quality and technological properties.
Our institutes jointly developed the UOM-1.0, UOM-1.5, UOM-2.0, UOM-2.5, and UOM-3.0 units (the direct predecessors of today’s industrial UZM-1.0R..3.0R series) for decontaminating and pasteurizing milk against tuberculosis and brucellosis pathogens based on infrared (IR) electric heating. These units can be operated at milk collection centers, dairy processing plants, and dairy farms and complexes of all forms of ownership.
Furthermore, these electric infrared pasteurizers can also be used for preparing milk for feeding livestock and calves, preheating milk prior to cream separation, and within complete technological lines for manufacturing commercial dairy products.
The milk treatment regime on these units has been officially approved for practical industrial application by the Ministry of Health of Ukraine, as well as by the Main Directorate of Veterinary Medicine and the State Veterinary Inspectorate of Ukraine, enabling agricultural producers to market safe pasteurized milk directly to the public.
2. Structure and Operating Principle
Structure and operating principle. The technological line of the pasteurization units comprises: a receiving balance tank equipped with a liquid level regulator, a sanitary centrifugal milk pump, a plate heat regenerator (recuperator), an infrared heating section, an automatic control cabinet, and stainless-steel hydraulic valves with monitoring and control instruments (Figure 1).
Operation encompasses the following phases of the technological process: initial filling of the hydraulic system with water and thermal sterilization of the circuit, continuous-flow milk pasteurization, intermediate water rinsing, and chemical circulation washing of the hydraulic system with acid and alkaline solutions followed by final water rinsing. The engineering design of the units provides full Clean-in-Place (CIP) circulation washing of the hydraulic system without disassembly.
The sole source of heat in the units is electric current. Steam is not required. Incoming cold raw milk is first preheated by heat regeneration from the outgoing warm pasteurized milk inside the plate recuperator, and is then heated to the final target temperature inside the infrared heating section.
Intensive short-time treatment of a thin layer of milk by infrared radiation of a specified wavelength at a precisely controlled heating temperature makes it possible to preserve the nutritional value, natural taste, vitamin composition, and technological cheesemaking qualities of the milk throughout processing.
For engineering comparison, the technical parameters of the traditionally used B6-OP-2-F-1 unit (manufactured by the Rostov Machine-Building Plant) and the proposed infrared UOM units are summarized in the comparative table (see also the extended benchmark table in our 1999 study Inactivation of Tuberculosis Pathogens in Milk Using an Infrared Electric Heating Pasteurizer). The external appearance and overall dimensions are shown in Figure 2.
| Technical Parameter | UOM-1.0 / UZM-1.0R | UOM-2.0 / UZM-2.0R | UOM-3.0 / UZM-3.0R | Traditional B6-OP-2-F-1 (Rostov Plant) |
|---|---|---|---|---|
| Flow Capacity, L/h | 1,000 | 2,000 | 3,000 | 1,000 |
| Brucellosis / Tuberculosis Inactivation Temp, °C | 77 – 79 °C | 77 – 79 °C | 77 – 79 °C | 90 °C (5 min) / 85 °C (30 min) |
| Holding Time at Target Temperature | 0 s (without holding) | 0 s (without holding) | 0 s (without holding) | 300 s (5 min) or 1,800 s (30 min) |
| Specific Electricity Consumption, kWh/ton | 18 – 20 | 18 – 20 | 18 – 20 | ~50 – 53.2 (2.5× higher) |
| Unit Metal Mass, kg | 250 | 350 | 450 | 1,400 (3–4× heavier) |
3. Technology of Industrial Application & Core Advantages
Technology of application. The general technology of operating the proposed units under industrial farm and dairy plant conditions is presented in Figure 1. The technological line provides for the delivery of raw milk from a transport milk pipeline or other containers (milk cans, tankers) onto milk scales, and then into a milk receiving tank, from which it flows by gravity or is pumped by a sanitary milk pump into the pasteurizer, where decontamination (pasteurization) is performed in a continuous stream. Thereafter, the milk passes through the cooler into an insulated storage tank for pasteurized milk, from which it is pumped into road milk tankers or other containers and dispatched for sale. Where extended storage is required, a refrigeration unit is incorporated into the technological line.
Core advantages: the units decontaminate (pasteurize) milk using only electric current; they are the most economical in terms of both installation and daily operation; inactivation of brucellosis and tuberculosis pathogens in milk takes place in continuous flow at significantly lower temperatures than in traditional units (77 and 79 °C without holding time instead of 90 °C with a 5-minute hold or 85 °C with a 30-minute hold); specific energy consumption for decontaminating (pasteurizing) 1 ton of milk is only 18–20 kWh/ton, which is two and a half times lower than in the best traditional pasteurizers; metal mass is reduced three to four times; required operating floor space is reduced two and a half times; and the quality of pasteurized milk in terms of technological indicators and nutritional value surpasses milk treated on traditional units.
By agreement with the customer, our enterprise manufactures milk pasteurization (decontamination) units of any required flow capacity — from 1,000 to 3,000 L/h (as well as compact farm units from 100 to 500 L/h). Work is also carried out on creating high-temperature milk treatment units aimed at extending refrigerated shelf life and manufacturing specialized dairy products.