Mon–Sat: 08:00–19:00

In-Bottle Wine Pasteurizer PV-E

Found 3 goods
Sorting:
In-Bottle Wine Pasteurizer PV-E50 (50 L)
163 200 грн
In-Bottle Wine Pasteurizer PV-E75 (75 L)
184 700 грн
In-Bottle Wine Pasteurizer PV-E100 (100 L)
199 500 грн

In-Bottle Wine Pasteurizers (PV-E Series)

PV-E Series In-Bottle Wine Pasteurizer Model Lineup

Model Total Bath Volume Wine Volume per Cycle Heater Power Cooling Water per Cycle
PV-E50 100 L ~ 50 L (~64 bottles) 8 kW ~ 70 L
PV-E75 150 L ~ 75 L (~100 bottles) 12 kW ~ 100 L
PV-E100 200 L ~ 100 L (~144 bottles) 16 kW ~ 120 L

Batch in-bottle wine pasteurizers of the PV-E Series (water baths) manufactured by PE Fomin R.G. (Fomin R.G. Engineering) are designed for gentle thermal stabilization of wine directly inside glass bottles after filling and corking. This is the classic benchmark pasteurization method for craft wineries, family chateaux, and producers of vintage still wines where preserving delicate varietal bouquet components without chemical preservatives is paramount.

The core advantage of this method is that thermal treatment takes place inside a hermetically corked bottle. Complete absence of contact between heated wine and atmospheric oxygen eliminates oxidation risk, while internal vapor pressure is retained inside the bottle, preventing evaporation of alcohol and aromatic esters.

Intended Application: In-line and batch pasteurizers of the PV and PV-E series are engineered specifically for gentle thermal stabilization of still non-carbonated dry, semi-dry, semi-sweet, and dessert wines in a sealed hydraulic circuit or directly inside corked glass bottles without oxygen contact.

Key Technological Advantages of the PV-E Series

  • 100% Protection Against Oxidation & Degassing: Pasteurization takes place inside a sealed bottle under a secured cork. Zero contact with atmospheric oxygen protects the wine against premature aging.
  • Gentle Thermodynamic Regime: Heating is performed by continuously circulating water at a moderate temperature of 60–68°C with a holding time of 15–20 minutes. This gentle thermal gradient reliably inactivates wild yeasts and acetic acid bacteria without producing a “cooked” flavor.
  • Absolute Biological Safety: Because pasteurization is performed after bottling and corking, the risk of secondary microbial contamination from ambient air or filling nozzles is completely eliminated.
  • Turbulent Heat Distribution: A built-in circulation pump continuously circulates water through the external heating module, eliminating temperature stratification in the bath and ensuring uniform heating of every bottle in the batch.
  • Controlled Gradient Cooling: Glass bottles are protected from thermal shock by gradually displacing hot water with cold tap water through a three-way valve, keeping the temperature differential between water and glass strictly within safe limits.

Process Physics & Rules for Handling Glass Bottles

Glass has high thermal resistance and low tolerance to sudden temperature jumps. PV-E Series pasteurizers implement a step-by-step thermal algorithm that completely eliminates thermal shock:

Structure & Water Circulation Schematic

Schematic diagram of forced water circulation in the PV-E in-bottle wine pasteurizer

Diagram Legend:

  • 1 — Thermally insulated stainless steel bath (with perforated bottle tray);
  • 2 — Water circulation pump;
  • 3 — Outlet water temperature sensor;
  • 4 — Electric heating section (immersion heater module);
  • 5 — Inlet water temperature sensor;
  • 6 — Three-way valve (switching between closed circulation and cooling water displacement);
  • ЗВ (Drain) — Water discharge line.

Operating Protocol of the PV-E Pasteurizer:

  1. Loading & Cork Securing: Corked bottles are placed onto the perforated food-grade stainless steel tray inside the insulated bath. Important: corks must be secured with wire hoods (muselets) or special clamps to compensate for internal thermal expansion of the liquid.
  2. Water Filling: The bath is filled with water to 2–3 cm above the wine level inside the bottles.
  3. Smooth Warm-Up: The circulation pump moves water through the heating module, smoothly raising bath temperature to 60–68°C over approximately 60 minutes.
  4. Holding Exposure: The industrial digital controller maintains a steady temperature for 15–20 minutes to guarantee complete inactivation of residual microflora.
  5. Gradient Cooling: Using the three-way valve, the operator gradually displaces hot water with cold tap water. Smooth cooling prevents glass cracking and allows safe unloading of the finished batch.
For wineries operating continuous packaging lines into Bag-in-Box pouches or kegs, explore our In-Line Hot-Fill Wine Pasteurizers (PV Series).

How to Buy a In-Bottle Wine Pasteurizer (Pv-E Series) Direct from Manufacturer PE Fomin R.G.: Price, Warranty & Delivery

Directly from the Ukrainian industrial equipment manufacturer PE Fomin R.G. (Fomin R.G. Engineering) (over 400 operating installations across all regions of Ukraine, the Republic of Moldova, and Europe), you can buy a in-bottle wine pasteurizer (PV-E series) directly from the factory with zero intermediary markups. Depending on hourly flow capacity, available electrical grid power, and configuration, the direct manufacturer price in this category ranges from €3,630 to €4,430 (3 serial models available).

Every unit undergoes full hydraulic and thermal bench testing before dispatch and includes a 12-month manufacturer warranty, official commercial invoice, operator training, and fast delivery across Ukraine and 16 European countries via Nova Post and freight carriers. To request a quotation or custom calculation, call or message us at +380503257808 (Viber, Telegram, WhatsApp) or visit our Contacts page.

Pricing & Delivery Terms: The price includes international transport preparation costs (plastic pallets, cargo lashing straps on the pallet, packaging cardboard, stretch film), customs broker services (export customs clearance), and transport costs for delivering the cargo to the "Nova Post" carrier branch.