Mon–Sat: 08:00–19:00
Article: ПВ-Е75

In-Bottle Wine Pasteurizer PV-E75 (75 L)

Available
184 700 грн
  • Nova Post (across Ukraine & Europe)
  • Courier delivery to your door
  • Other freight carriers & direct pickup
  • International shipping: The price includes international transport preparation costs (plastic pallets, cargo lashing straps on the pallet, packaging cardboard, stretch film), customs broker services (export customs clearance), and transport costs for delivering the cargo to the "Nova Post" carrier branch.
  • Bank transfer by official invoice (UAH / EUR / USD)
  • Export price terms: The price includes international transport preparation costs (plastic pallets, cargo lashing straps on the pallet, packaging cardboard, stretch film), customs broker services (export customs clearance), and transport costs for delivering the cargo to the "Nova Post" carrier branch.
  • Cash on delivery or upon pickup
  • Official 12-month manufacturer warranty from PE Fomin R.G.
  • Direct engineering support, commissioning consultation, and spare parts availability

In-Bottle Wine Pasteurizer PV-E75 (75 L)

PV-E75 is a specialized batch water-bath pasteurizer with a total bath volume of 150 L, designed for thermal processing of approximately 75 L of wine per cycle. The unit is engineered for gentle pasteurization of wine already filled and corked in glass bottles, guaranteeing 100% preservation of bouquet with zero risk of secondary contamination.

Key Technological Advantages

  • 100% Protection Against Oxidation & Alcohol Loss: Pasteurization takes place inside hermetically corked bottles. Zero contact between hot wine and oxygen prevents premature aging reactions, while the sealed closure retains vapor pressure so ethyl alcohol and delicate aromatic esters cannot evaporate.
  • Gentle Thermodynamic Profile: Heating is performed via forced water circulation at 60–68°C with a 15–20 minute holding period. The smooth temperature gradient inactivates wild yeasts and bacteria without imparting any cooked flavor.
  • Absolute Biological Safety: Because thermal treatment is performed after bottling and corking, the risk of airborne or filling-line recontamination is reduced to zero.

Technological Features & Engineering Trade-Off

This method requires more energy and time per liter than in-line systems (PV series), as heat is expended on warming both the water bath and the glass bottles. However, water-bath pasteurization preserves the finest aroma notes of premium boutique wines without chemical preservatives.

  • Cycle Duration: Ramp-up (~60 min) + Holding exposure (15–20 min).
  • Cooling: Gradual displacement of hot water with cold water (~100 L) to protect glass bottles against thermal shock.
  • Energy Consumption: Installed power of 12 kW ensures a safe heating gradient; energy consumption per batch is approximately 11 kWh.

Construction Diagram of Pasteurizer PV-E75

Construction diagram, assemblies, and control panel of wine pasteurizer PV-E75

  1. Heating element unit; 2. Control panel; 3. Oven digital temperature controller; 4. Circulation pump; 5. Electric contact pressure gauge; 6. Insulated water bath (150 L).

Process Flow Diagram (Heat-Transfer Water Circulation)

Process flow diagram of water circulation in wine pasteurizer PV-E75

WD — water drain.

Operating Sequence:

Preparation: Corked bottles are placed in the insulated bath (1). Important: corks must be secured with wire hoods (muselets) or bottle clamps. Water is filled 2–3 cm above the wine level inside the bottles. The circulation pump (2) draws water from the bath, forces it through the electric heater (4), and returns it to the bath. Turbulent circulation eliminates temperature stratification. Once the target temperature (60–68°C) is reached, the timer relay counts down the holding exposure. Cooling is performed by gradually replacing hot water with cold water via the three-way valve (6) to prevent glass breakage.

Technical Specifications of PV-E75

Parameter Unit Value
Total Water Bath Volume L 150
Net Wine Volume (per Cycle) L ~ 75
Installed Electrical Power kW 12
Wine Pasteurization Temperature °C 60 - 68 (up to 75)
Cooling Water Consumption (Displacement) L ~ 100
Overall Dimensions (W x L x H) m 2.2 x 0.9 x 1.6
PV-E75 is the ideal choice for craft wineries seeking to preserve the delicate aroma of bottled wines while eliminating microbiological spoilage in the bottle.

Video Operation Review — In-Bottle Wine Pasteurizer PV-E75 (75 L)

Video Review Summary:

Overview of the 75-liter in-bottle wine pasteurizer manufactured by PE Fomin R.G. Ensures biological stabilization of bottled still and semi-sweet wines in sealed glass bottles while preserving bouquet and aroma.

Video & Photo Gallery — In-Bottle Wine Pasteurizer PV-E75 (75 L)

Об'єм ємності, л
~150
Об'єм вина, л
~75
Тривалість нагрівання, хв
~60
Встановлена потужність, кВт/год
12
Енерговитрати на пастеризацію 75 л вина, кВт
~11
Температура пастеризації, °C
60-68
Витримка, хв
15-20
Витрати води на нагрівання вина, л
~75
Витрати води на охолодження вина, л
~100
Розміри (ШхДхВ), м
2,2 х 0,9 х 1,6
Габарити ємності (ШхДхВ), м
0,75 х 0,85 х 0,3
Be the first to review "In-Bottle Wine Pasteurizer PV-E75 (75 L)"
Write a review
Name
Email
Review
Rate the product on a 5-point scale
Your rating:
Thanks for your review!

Products from this category

In-Bottle Wine Pasteurizer PV-E50 (50 L)
163 200 грн
In-Bottle Wine Pasteurizer PV-E100 (100 L)
199 500 грн

Viewed Products

In-Bottle Wine Pasteurizer PV-E75 (75 L)
184 700 грн