Industrial In-Line Milk Pasteurizers 1000–3000 L/h
Model Range & Technical Specifications of Industrial Milk Pasteurizers UZM (1000–3000 L/h)
| Pasteurizer Model | Nominal Capacity | Installed Power | Specific Energy Consumption | Outlet Temperature & Application | Dimensions (W × L × H) |
|---|---|---|---|---|---|
| UZM-1.0R | 1000 L/h (1 t/h) | 16 kW | 12–14 kWh/t | T in + 7…9 °C (deep recuperation: for cooling tank or bottling) | 1.5 × 1.5 × 1.7 m |
| UZM-1.0P | 1000 L/h (1 t/h) | 46–49 kW | 39–46 kWh/t | 35–40 °C (recuperation + reheating: for cheese vat, separator, or taxi) | 1.5 × 1.5 × 1.8 m |
| UZM-2.0R | 2000 L/h (2 t/h) | 25 kW | 12–14 kWh/t | T in + 7…9 °C (deep recuperation: for cooling tank or bottling) | 1.7 × 1.5 × 1.8 m |
| UZM-2.0P | 2000 L/h (2 t/h) | 80 kW | 39–46 kWh/t | 35–40 °C (recuperation + reheating: for cheese vat, separator, or taxi) | 2.0 × 1.5 × 1.8 m |
| UZM-3.0R | 3000 L/h (3 t/h) | 38 kW | 12–14 kWh/t | T in + 7…9 °C (deep recuperation: for cooling tank or bottling) | 2.1 × 1.5 × 1.8 m |
| UZM-3.0P | 3000 L/h (3 t/h) | 120 kW | 39–46 kWh/t | 35–40 °C (recuperation + reheating: for cheese vat, separator, or taxi) | 1.8 × 2.0 × 1.8 m |
Industrial milk disinfection and pasteurization units (UZM Series) manufactured by PE Fomin R.G. (Fomin R.G. Engineering) are high-efficiency continuous-flow systems built on direct infrared heating technology. Designed specifically for intensive daily operation at dairy processing plants and large livestock complexes, these systems guarantee uninterrupted flow, complete microbiological safety, and the lowest processing cost per ton of milk.
Process Physics: Thermal Shock & Deep Heat Regeneration
The core engineering feature of our industrial UZM units is their ultra-high heat transfer intensity. Energy from the infrared heating section is transferred instantaneously to milk moving in a continuous flow. This steep temperature gradient creates a lethal thermal shock effect. Rapid energy input ruptures the cell membranes of the most heat-resistant pathogens (including Mycobacterium tuberculosis), achieving complete disinfection at 79°C (±0.5°C) without prolonged stationary holding.
By comparison, standard batch pasteurizers (“kettles” / VDP vats) operate at 63–65°C for 30 minutes. However, when tuberculosis is detected in a herd, veterinary sanitation regulations for batch vats require harsh, prolonged exposure (85°C for 30 minutes or 90°C for 5 minutes), which irreversibly damages the cheesemaking and nutritional properties of milk.
While continuous-flow infrared pasteurization guarantees microbiological safety at a brief exposure time, raw milk entering the plate/tubular regenerator must meet basic quality standards: transition milk with a high colostrum content (first 5 days post-calving) and high-acidity milk above 21 degrees Turner (°T) should not be fed into in-line systems. In return, the continuous-flow method delivers exceptional economics thanks to its built-in heat regeneration circuit:
- Radical Energy Savings: Hot pasteurized milk (79°C) is cooled by the counter-current flow of incoming cold raw milk. This preheats the raw milk free of charge and reduces electricity consumption by 80–90%. As a result, specific energy consumption is only 12–14 kWh per 1 ton of milk.
- Zero Cooling Water & Reduced Chiller Load: Because the finished product is cooled directly by incoming cold raw milk, no tap water is discharged into the drain during the pasteurization cycle, and chiller load is minimized.
Specification & Designation of Industrial Series
Depending on your downstream technological process, we manufacture industrial pasteurizers in two specialized series:
“R” Series Models (Deep Heat Regeneration)
- Application: For accumulating pasteurized milk in cooling tanks, pouch/bottle packaging, or supplying automated calf feeding stations that have their own internal heater.
- Temperature Profile: The outlet temperature of pasteurized milk is only 7–9°C higher than the inlet raw milk temperature (maximum heat recovery).
- Specific Energy Consumption: 12–14 kWh per 1 ton of milk.
“P” Series Models (Regeneration + Post-Heating)
- Application: For direct cheesemaking in cheese vats, cream separation, or filling insulated milk taxis with warm milk ready for calf feeding.
- Temperature Profile: Equipped with an additional controlled post-heating module. Even when fed ice-cold raw milk (+4°C), the unit delivers a steady outlet stream at the exact physiological or technological target temperature of 35–40°C.
- Specific Energy Consumption: 39–46 kWh per 1 ton of milk (reflecting the physical heat required to raise the outlet flow to 35–40°C).
Efficiency Comparison: Industrial In-Line UZM Pasteurizer vs. Cascade of Batch Vats (VDP)
| Comparison Parameter | Industrial In-Line UZM Pasteurizer (Pros) | Cascade of Traditional VDP / VTP Batch Vats (Cons) |
|---|---|---|
| Line Configuration & Volume Distribution (1000–3000 L) | ✔ Single compact monoblock continuous-flow unit (UZM-1.0, UZM-2.0, or UZM-3.0) occupying 1.5–2.5 m² and processing the entire volume in one line. | ✖ Due to the limited capacity of serial VDP vats, industrial batches must be split across a cascade of vessels: 1000 L — 1×1000 L, 1500 L — 3×500 L, 2000 L — 2×1000 L, 3000 L — 3×1000 L. |
| Pasteurization Regime & Cycle Duration | ✔ Instant infrared heating in flow (75–90°C, 15–20 s holding) with simultaneous heat regeneration. Processing 1000–3000 L takes exactly 1 hour at rated flow. | ✖ Sequential inertial cycle in every vat of the cascade (slow water-jacket heating to 65–85°C, 30-min holding, and slow cooling) — 3.5–4.5 hours per cycle. |
| Installed Power & Electricity Consumption | ✔ Up to 80–90% electricity savings via heat regeneration: only 12–14 kWh per ton (“R” Series) or 39–46 kWh per ton with 35–40°C outlet (“P” Series). | ✖ Zero regeneration and wasted heating of water jackets: total cascade power is 60–180 kW (108 kW for 3×500 L, 120 kW for 2×1000 L, 180 kW for 3×1000 L), consuming 120–360 kWh per cycle. |
| Cooling Water Consumption | ✔ 0 liters (Zero!). Hot pasteurized milk is cooled exclusively by the counter-current flow of cold raw milk in the regenerator. | ✖ Massive water waste: from 2,500 L (per 1000 L of milk) to 7,500 L (per 3000 L of milk) of clean cold water discharged into the drain every cycle. |
| Cheese Curd Quality, Proteins & Vitamins | ✔ 15–20 s exposure in a closed air-free flow preserves native whey proteins, calcium balance, and vitamins, ensuring maximum cheese yield. | ✖ Multi-hour thermal exposure denatures albumins and globulins, impairs rennet coagulation, and causes oxidation and a boiled flavor. |
| Automation & Clean-in-Place (CIP) | ✔ Automated closed-loop Clean-in-Place (CIP) washing of a single compact unit in 30–40 minutes with minimal detergent usage. | ✖ Separate manual washing and maintenance required for every vat in the cascade (2×1000 L, 3×1000 L, or 3×500 L), causing high labor costs and downtime. |
Engineering Calculator: Equipment Selection & Resource Simulation
Dynamic thermophysical calculation for industrial series (UZM-1.0 – UZM-3.0)
from 100 to 5000
default 1000
from 4 to 35
from 10 to 40
In-Line Pasteurizer
Total cycle time: ...
Total energy: ...
Water consumption: 0 L
Traditional Batch Vat (VDP)
Duration: ...
Energy (no regeneration): ...
Water discharged to drain: ...
* Mathematical Model: Incorporates the 10-parameter polynomial dependence of temperature delta (Δt) on flow rate (Vpast), raw milk inlet temperature, and pasteurization temperature for UZM units. For the “P” Series, the calculation includes the in-line post-heater module. For batch systems (VDP vats), the algorithm selects an equal-split parallel cascade of identical vats (up to 3 units for volumes up to 3000 L, 55% thermal efficiency, specific heat 3.9 kJ/kg·K). Holding time is modeled exponentially, and cooling time/water usage follow the Newton-Richmann law.
Industrial UZM Pasteurizers by PE Fomin R.G. guarantee a continuous flow of microbiologically pure milk with minimal operating costs.
How to Buy a Industrial Milk Pasteurizer Uzm (1–3 T/H) Direct from Manufacturer PE Fomin R.G.: Price, Warranty & Delivery
Directly from the Ukrainian industrial equipment manufacturer PE Fomin R.G. (Fomin R.G. Engineering) (over 400 operating installations across all regions of Ukraine, the Republic of Moldova, and Europe), you can buy a industrial milk pasteurizer UZM (1–3 t/h) directly from the factory with zero intermediary markups. Depending on hourly flow capacity, available electrical grid power, and configuration, the direct manufacturer price in this category ranges from €6,660 to €12,400 (6 serial models available).
Every unit undergoes full hydraulic and thermal bench testing before dispatch and includes a 12-month manufacturer warranty, official commercial invoice, operator training, and fast delivery across Ukraine and 16 European countries via Nova Post and freight carriers. To request a quotation or custom calculation, call or message us at +380503257808 (Viber, Telegram, WhatsApp) or visit our Contacts page.