Mon–Sat: 08:00–19:00
Article: УЗМ-1,0П

In-Line Calf Milk Pasteurizer UZM-1.0P (1 t/h) with Preheating Module

Available
320 900 грн
  • Nova Post (across Ukraine & Europe)
  • Courier delivery to your door
  • Other freight carriers & direct pickup
  • International shipping: The price includes international transport preparation costs (plastic pallets, cargo lashing straps on the pallet, packaging cardboard, stretch film), customs broker services (export customs clearance), and transport costs for delivering the cargo to the "Nova Post" carrier branch.
  • Bank transfer by official invoice (UAH / EUR / USD)
  • Export price terms: The price includes international transport preparation costs (plastic pallets, cargo lashing straps on the pallet, packaging cardboard, stretch film), customs broker services (export customs clearance), and transport costs for delivering the cargo to the "Nova Post" carrier branch.
  • Cash on delivery or upon pickup
  • Official 12-month manufacturer warranty from PE Fomin R.G.
  • Direct engineering support, commissioning consultation, and spare parts availability

In-Line Calf Milk Pasteurizer UZM-1.0P (1 t/h) with Preheating Module

UZM-1.0P is an industrial in-line infrared pasteurizer with an integrated final heating module, purpose-built for large dairy complexes (1000 L/h). It safely and economically converts non-grade (mastitic) milk or high-bacteria raw milk into safe liquid feed, protecting replacement calves against tuberculosis, bovine leukemia, and enteric pathogens.

Technology Guaranteeing Complete Pathogen Inactivation

At the core of UZM-1.0P is a high-intensity infrared (IR) heater operating at 75–90°C with a 15–20 s in-line holding time. Combined convective and infrared radiation in turbulent flow creates micro-boundary layers reaching 105–110°C (for 1.5–3 s), causing irreversible rupture of pathogen cell membranes and guaranteeing complete destruction of heat-resistant Mycobacterium bovis (tuberculosis).

Key Advantages of UZM-1.0P Over Batch Pasteurizers (VDP)

Parameter In-Line UZM-1.0P (1 t/h) Batch Pasteurizer (VDP) 1000 L
Disinfection Reliability Maximum (IR technology). Guarantees destruction of tuberculosis and pathogens in mastitic milk (75–90°C). Moderate. The 63–65°C (30 min) regime is often insufficient for milk with high bacterial load.
Time Efficiency High. Processes 1000 L in 60 min (continuous flow). Low. Processing cycle for 1000 L takes 180-240 min (heating, holding, cooling).
Energy Consumption Up to 60% savings via heat recuperation. Consumes 46 kWh per 1 ton. High consumption. Requires heating the entire volume without heat recovery.
Water Consumption Zero. Cooling is performed entirely by incoming cold raw milk. High. Requires large volumes of cold water to cool the water jacket.

Thermodynamic Comparison Calculator: UZM-1.0P vs. VDP Batch Vat System

Enter milk batch volume, flow rate, and process temperatures for an instant comparative calculation

Efficiency of In-Line UZM-1.0P
Recommended Model: UZM-1.0P
Installed Power (P_installed): 46.00 kW
• pasteurization section: 24.00 kW
• boosting heater section: 22.00 kW
Calculated Recuperation Delta (Δt): 0.00 °C
Actual Outlet Temperature: 40.0 °C
Pasteurization Cycle:
Pasteurization Time: 0 min 0 s
Pasteurization Energy: 0.00 kWh
In-Line Final Boosting:
Boosting Mode: none
Boosting Energy: 0.00 kWh
Total Operating Time: 0 min 0 s
Cooling Water Consumption: 0 L
Cooling Time: 0 minutes
Actual Electricity Consumed: 0.00 kWh
Energy & Resource Consumption of VDP Batch Vat
Selected Vat Configuration: VDP Batch Vat
Total VDP Heating Element Power (P_VDP): 0.00 kW
Vat Heating Time: 0 min 0 s
Holding Time (30 min): 0 min 0 s
Water-Jacket Cooling Time: 0 min 0 s
Total VDP Process Time: 0 min 0 s
Cooling Water Consumption: 0 L
Heating Electricity (55% efficiency): 0.00 kWh
Economic Benefit of Implementing UZM-1.0P: calculating...

Construction Diagram of Pasteurizer UZM-1.0P

Construction diagram and control panel of industrial pasteurizer UZM-1.0P

  1. Receiving tank, 200 L;
  2. Float level sensors (automating pump No. 2);
  3. Milk pump No. 1 (milk feed to pasteurization);
  4. Flow rate control valve;
  5. Electric contact pressure gauge;
  6. Three-way valve ("circulation" / "discharge" modes);
  7. Milk pump No. 2 (milk supply to receiving tank);
  8. Pasteurization section control unit;
  9. Heating section control unit;
  10. Oven digital temperature controller (pasteurization);
  11. Oven digital temperature controller (preheating);
  12. Infrared pasteurization section;
  13. Final heating section (warming to calf feeding temperature);
  14. Temperature sensors;
  15. Heat recuperation section.

Process Flow Diagram of UZM-1.0P

Process flow diagram of milk passing through the recuperator and heating module of pasteurizer UZM-1.0P

Diagram Legend:

  1. Receiving tank, 200 L;
  2. Sanitary milk pump;
  3. Heat recuperation section;
  4. IR pasteurization section;
  5. Pasteurization section temperature sensor;
  6. Additional heating section;
  7. Heating section temperature sensor;
  8. Three-way valve (circulation / discharge).

PM — outlet of ready-to-feed warm pasteurized milk.

Operating Sequence:

  1. Heat Recuperation: Raw milk from the receiving tank (1) is pumped into the plate heat recuperator (3), where it is preheated to ~67°C by recovering heat from the outgoing hot pasteurized stream.
  2. IR Pasteurization: The milk enters the IR pasteurization section (4) and is heated to 75–90°C, holding that temperature for 15–20 seconds in the tubular holder for guaranteed pathogen inactivation.
  3. Recuperative Cooling: Hot milk returns to the recuperator (3), where it is cooled by incoming raw milk without using any external cooling water.
  4. Final Warming to Feeding Temperature: When processing chilled tank milk (4°C), deep recuperation cools the milk below calf feeding temperature. Therefore, the stream passes through the final heating module (6), bringing it precisely to a stable 38–45°C.
  5. Discharge: Ready-to-feed milk (PM) is pumped directly into mobile milk taxis, shuttle feeders, or cans.

Technical Specifications of UZM-1.0P

5 – 90
Parameter Unit Value
Equipment Type — In-line continuous, with final heating module
Flow Capacity L/h 1000
Installed Power kW 49
Electricity Consumption (per 1 ton) kWh 46
Pasteurization Temperature (Adjustable) °C
In-Line Holding Time s 15 - 20
Outlet Milk Temperature (Adjustable) °C 38 - 45
Overall Dimensions (W x L x H) m 1.5 x 1.5 x 1.8
UZM-1.0P is a high-capacity, engineered solution for seamless integration into the calf feeding workflow of large commercial dairy farms. Contact us to discuss implementation details.

Video of In-Line Milk Pasteurizer UZM-1.0P (1000 L/h)

Video Review Summary:

Engineering video review and industrial operation of the UZM-1.0P in-line milk pasteurizer (1000 liters per hour), equipped with a high-efficiency plate heat recuperator and post-heating section. Key advantages: high continuous in-line speed, exceptional convenience (calves can be fed or milk at 35–45 degrees Celsius can be fed to a separator or cheese vat immediately during pasteurization), eco-friendliness and economy (major electricity savings via plate heat recuperation and zero cooling water consumption), full automation with the AQ-teck microprocessor controller, compact footprint, and closed-loop CIP circulation washing.

Video & Photo Gallery — In-Line Calf Milk Pasteurizer UZM-1.0P (1 t/h) with Preheating Module

Field Photos of Milk Pasteurizer 1000 L/h for Calf Feeding UZM-1.0P on Dairy Farms

Продуктивність, т/год
1
Встановлена потужність, кВт/год
49
Витрати електроенергії на пастеризацію 1 т молока, кВт
46
Температура пастеризації, °С,
79-90
Витримка, с
15-20
Температура пастеризованого молока на виході з пастеризатора, °С
38-40
Be the first to review "In-Line Calf Milk Pasteurizer UZM-1.0P (1 t/h) with Preheating Module"
Write a review
Name
Email
Review
Rate the product on a 5-point scale
Your rating:
Thanks for your review!

Viewed Products